TEADIT® 25BI is a multidirectionally expanded gasket-tape, produced from 100% pure PTFE (Polytetrafluorethylen). The whole production process is subject to strictest quality control, registered under ISO 9001.
TEADIT® 25BI – due to its excellent malleability and adaptability – is particularly well suited to compensate for irregularities or damages on the sealing areas, as well as for all stress-sensitive joints. A special manufacturing process results in almost equal tensile strength in both the longitudinal and cross direction. As a result of this, the material does not change its width under compression. This is in stark contrast to normal expanded PTFE tapes! TEADIT 25BI, because of this property, is extremely well suited as a gasket material for narrow sealing areas and in all applications where a defined gasket width (under load) is required. Typical applications are enamelled and glass flanges, heat exchangers, large flanges and containers, pressure vessels, suction filters and strainers, etc.
Developing A Special Camprofile Gasket For a Pressure Vessel
Style 2007 in Chemical Slurry
A chemical processing facility was having issues maintaining adequate sealing on a slurry pump with their existing packing, requiring retightening every few hours.
Thermic Fluid Case History
Dual Packing Combination Kit in Sugar Industry
2774 and Sealpak® 46
2235 in Steam Application Case History
A chemical processing facility was experiencing steam leakage on a sulphonator vessel after only a couple of weeks of run-time leading to reduced efficiency in the process and longer required run times.
Teadit 24SH in Chemical Processing
A chemical processing facility was experiencing leaks on FRP flange connections due to damage to the flanges caused by the use of gaskets that were not suitable for the requirements of low strength flanges, like FRP.
Teadit Camprofile Gasket in Chemical Processing
A PTFE manufacturing facility was experiencing leaks on an FEP Extruder that was originally designed to utilize a metal reinforced compressed asbestos gasket.
ETP Copper Process Case History
A metal manufacturer was looking for a replacement for asbestos compression packing.
CMS Plant Case History
A chemical plant was having issues with skived virgin PTFE gaskets failing in a heat exchanger application.
2774 Harsh Chemicals Case History
A customer was using a PTFE packing from another manufacture in an auger conveyor system.
