Style 2019 is an interlock braid using carded synthetic yarns thoroughly impregnated with PTFE suspensoid. The finished packing is again coated with PTFE dispersion and a break-in lubricant is added to reduce shaft wear and eliminate glazing at start up.
Style 2019 is an excellent multi-service packing that finds a wide variety of uses throughout a plant. It handles steam, water, solvents, oils, mild acids and alkalies, and a broad range of other chemicals. It is white in color and will not discolor the flow media. This style is recommended for use in centrifugal, rotary and reciprocating pumps and also mixers, agitators, and expansion joints.
Style 2018 packing is a non-lubricated version of Style 2019.
Developing A Special Camprofile Gasket For a Pressure Vessel
Style 2007 in Chemical Slurry
A chemical processing facility was having issues maintaining adequate sealing on a slurry pump with their existing packing, requiring retightening every few hours.
Thermic Fluid Case History
Dual Packing Combination Kit in Sugar Industry
2774 and Sealpak® 46
2235 in Steam Application Case History
A chemical processing facility was experiencing steam leakage on a sulphonator vessel after only a couple of weeks of run-time leading to reduced efficiency in the process and longer required run times.
Teadit 24SH in Chemical Processing
A chemical processing facility was experiencing leaks on FRP flange connections due to damage to the flanges caused by the use of gaskets that were not suitable for the requirements of low strength flanges, like FRP.
Teadit Camprofile Gasket in Chemical Processing
A PTFE manufacturing facility was experiencing leaks on an FEP Extruder that was originally designed to utilize a metal reinforced compressed asbestos gasket.
ETP Copper Process Case History
A metal manufacturer was looking for a replacement for asbestos compression packing.
CMS Plant Case History
A chemical plant was having issues with skived virgin PTFE gaskets failing in a heat exchanger application.
2774 Harsh Chemicals Case History
A customer was using a PTFE packing from another manufacture in an auger conveyor system.
