STYLE 2214High Temperature and High Pressure Valve Stem
Description and Applications
Style 2214 is a proprietary braid-over-core construction, using a special high temperature, Inconel reinforced fiber and a non-hardening core. The packing is impregnated with a high temperature resistant compound, and coated with fine particles of graphite to act as a surface lubricant. This style is also treated with a sacrificial material to alleviate electrolytic action.
Style 2214 is a firm, high density packing. It can handle steam, most chemicals, mild acids, and alkalies. It is excellent for use in steam turbines, high temperature motor-actuated slide valves, and in high pressure/high temperature valving in general.
Developing A Special Camprofile Gasket For a Pressure Vessel
Style 2007 in Chemical Slurry
A chemical processing facility was having issues maintaining adequate sealing on a slurry pump with their existing packing, requiring retightening every few hours.
Thermic Fluid Case History
Dual Packing Combination Kit in Sugar Industry
2774 and Sealpak® 46
2235 in Steam Application Case History
A chemical processing facility was experiencing steam leakage on a sulphonator vessel after only a couple of weeks of run-time leading to reduced efficiency in the process and longer required run times.
Teadit 24SH in Chemical Processing
A chemical processing facility was experiencing leaks on FRP flange connections due to damage to the flanges caused by the use of gaskets that were not suitable for the requirements of low strength flanges, like FRP.
Teadit Camprofile Gasket in Chemical Processing
A PTFE manufacturing facility was experiencing leaks on an FEP Extruder that was originally designed to utilize a metal reinforced compressed asbestos gasket.
ETP Copper Process Case History
A metal manufacturer was looking for a replacement for asbestos compression packing.
CMS Plant Case History
A chemical plant was having issues with skived virgin PTFE gaskets failing in a heat exchanger application.
2774 Harsh Chemicals Case History
A customer was using a PTFE packing from another manufacture in an auger conveyor system.
